Skip to main content

All Wahoo Products are 20% Off!

Filter By:

  • Show More Brands

  • Show Fewer Brands

Other

Cane Creek Cane Creek ST G4 Elastomer Insert -Firm
$4.99
Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek ST G4 Elastomer Insert -Firm
Cane Creek Cane Creek DBAir IL Volume Reduction Spacer Kit
$8.99
Air Spring Volume Reduction Kit - Cane Creek DBAir IL Volume Reduction Spacer Kit
Cane Creek Cane Creek LT G4 Elastomer Insert - X-Firm
$16.99
Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek LT G4 Elastomer Insert - X-Firm
Cane Creek Cane Creek ZN40-Bearing 41mm Zinc Plated, Each
$10.99
40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets
Cane Creek Cane Creek ZN40-Bearing 47mm 45 x 45 Zinc, Each
$21.99
40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets
Cane Creek 110-Series 52/33mm Alloy Crown Race
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements
Cane Creek 110-Series 52/40mm Alloy Crown Race
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 40mm (1-1/2") tapered steerer tubes - Lightweight aluminum construction
Cane Creek Cane Creek 40 Compression Ring 41-42/28.6
$5.99
Compression ring fits above the upper bearing in a Cane Creek headset to ensure vertical and horizontal compression is optimal. - Compatible with 41mm and 42mm OD upper bearings
Cane Creek Cane Creek ZN40 Series Bearing Kit 36 x 45, 42/52mm
$29.99
40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets
Cane Creek Cane Creek 110-Series 5mm Interlok Spacer Black
$11.99
110-Series Alloy Interlok Headset Spacer - Aluminum construction
Cane Creek Cane Creek VALT Lightweight Steel Spring for Coil Shock, 2.00
$79.99
A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor
Cane Creek Cane Creek VALT Lightweight Steel Spring for Coil Shock, 3.00
$79.99
A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor
Cane Creek Cane Creek Norglide Bushing for 14.7mm Bores
$6.99
Replacement bushings for Cane Creek shocks.
Cane Creek Cane Creek 1-1/8
$1.99
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
Cane Creek Cane Creek VALT Lightweight Steel Spring for Coil Shock, 2.50
$79.99
A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor
Cane Creek Cane Creek VALT Spring Clip Converter for Fox Shocks
$9.99
Allows the use of VALT springs with Fox coil shocks.
Cane Creek CaneCreek Lt Elastomer - Medium #5 - Black (Clear Bagged)
$7.99
Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.
Cane Creek Cane Creek ZN40-Bearing 41.8mm 45 x 45 Zinc, Each
$11.99
40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets
Cane Creek Cane Creek ThudGlove Suspension Cover for Thudbuster LT Seatpost
$18.99
Protects Cane Creek Thudbuster moving parts from grit and grime. - Neoprene construction
Cane Creek Cane Creek VALT Lightweight Steel Spring for Coil Shock, 2.25
$79.99
A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor
Cane Creek Cane Creek VALT Lightweight Steel Spring for Coil Shock, 2.50
$79.99
A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor
Cane Creek Cane Creek VALT Lightweight Steel Spring for Coil Shock, 3.00
$79.99
A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor
Cane Creek CaneCreek Thudbuster Lt Elastomer - Xsoft #1 - Black (Clear Bagged)
$7.99
Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.
Cane Creek Cane Creek VALT Lightweight Steel Spring for Coil Shock, 2.25
$79.99
A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor
Cane Creek Cane Creek ZN40-Bearing 38mm Zinc Plated, Each
$11.99
40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets
Cane Creek Cane Creek Hellbender Bearing, 42mm SHIS
$29.99
Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets. - Cane Creek Hellbender Bearing, 42mm SHIS
Cane Creek Cane Creek VALT Lightweight Steel Spring for Coil Shock, 2.50
$79.99
A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor
Cane Creek 110-Series 41-42/30mm Alloy Crown Race
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 41 and 42mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Lightweight aluminum construction
Cane Creek 110-Series 47/33mm Alloy Crown Race
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 47mm lower headset bearings - Compatible with 33mm (1-1/4") tapered steerer tubes - Lightweight aluminum construction
Cane Creek 40-Series 52/40mm Steel Crown Race
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 40mm (1-1/2") tapered steerer tubes - Durable steel construction
Page 1 of 3 Next page